NOTE: NIST's February 2025 Draft 2 has entirely withdrawn FF3 and FF3-1 from the NIST standard due to published vulnerabilities.
This software is provided for educational and experimental use and comes with no warranty of any kind. It is intended for developers and researchers familiar with cryptographic standards.
An implementation of the draft NIST FF3 and FF3-1 Format Preserving Encryption (FPE) algorithms in Python. FF1 implementations are outside the scope of this open source project.
This package implements the FF3 and FF3-1 algorithms as specified in NIST Special Publication 800-38G Methods for Format-Preserving Encryption (now withdrawn), and includes the revisions on February 28th, 2019 with a draft update for FF3-1 (now withdrawn).
- NIST SP 800-38G (FF1 & FF3) — Withdrawn due to published vulnerabilities in FF3
- NIST SP 800-38G Revision 1 (FF3-1) — Withdrawn due to published vulnerabilities in FF3-1
- NIST SP 800-38G Revision 1 (2nd Public Draft) — Current draft; FF1 only (does not define FF3/FF3-1)
Changes to minimum domain size and revised tweak length have been implemented in this package with support for both 64-bit and 56-bit tweaks. NIST has only published official test vectors for 64-bit tweaks, but draft ACVP test vectors have been used for testing FF3-1.
pip3 install ff3
FF3 is a Feistel cipher, and Feistel ciphers are initialized with a radix representing an alphabet. The number of characters in an alphabet is called the radix. The following radix values are typical:
- radix 10: digits 0..9
- radix 36: alphanumeric 0..9, a-z
- radix 62: alphanumeric 0..9, a-z, A-Z
Special characters and international character sets, such as those found in UTF-8, are supported by specifying a custom alphabet. Also, all elements in a plaintext string share the same radix. Thus, an identification number that consists of an initial letter followed by 6 digits (e.g. A123456) cannot be correctly encrypted by FPE while preserving this convention.
Input plaintext has maximum length restrictions based upon the chosen radix (2 * floor(96/log2(radix))):
- radix 10: 56
- radix 36: 36
- radix 62: 32
To work around string length, it's possible to encode longer text in chunks.
The key length must be 128, 192, or 256 bits in length. The tweak is 7 bytes (FF3-1) or 8 bytes for the original FF3.
As with any cryptographic package, managing and protecting the key(s) is crucial. The tweak is generally not kept secret. This implementation does not intentionally retain key material beyond cipher initialization.
The example code below uses the default domain [0-9] and can help you get started.
from ff3 import FF3Cipher
key = "2DE79D232DF5585D68CE47882AE256D6"
tweak = "CBD09280979564"
c = FF3Cipher(key, tweak)
plaintext = "3992520240"
ciphertext = c.encrypt(plaintext)
decrypted = c.decrypt(ciphertext)
print(f"{plaintext} -> {ciphertext} -> {decrypted}")
# format encrypted value
ccn = f"{ciphertext[:4]} {ciphertext[4:8]} {ciphertext[8:12]} {ciphertext[12:]}"
print(f"Encrypted CCN value with formatting: {ccn}")This package installs the command line scripts ff3_encrypt and ff3_decrypt which can be run from the Linux or Windows command line.
% ff3_encrypt 2DE79D232DF5585D68CE47882AE256D6 CBD09280979564 3992520240
8901801106
% ff3_decrypt 2DE79D232DF5585D68CE47882AE256D6 CBD09280979564 8901801106
3992520240
Custom alphabets up to 256 characters are supported. To use an alphabet consisting of the uppercase letters A-F (radix=6), we can continue from the above code example with:
c6 = FF3Cipher.withCustomAlphabet(key, tweak, "ABCDEF")
plaintext = "BADDCAFE"
ciphertext = c6.encrypt(plaintext)
decrypted = c6.decrypt(ciphertext)
print(f"{plaintext} -> {ciphertext} -> {decrypted}")This project was built and tested with Python 3.9 and later versions. The only dependency is PyCryptodome.
Official test vectors for FF3 provided by NIST, are used for testing in this package. Also included are draft ACVP test vectors with 56-bit tweaks.
To run unit tests on this implementation, including all test vectors from the NIST specification, run the command:
python3 -m ff3.ff3_testThe Mysto FF3 was benchmarked on a MacBook Air (1.1 GHz Quad-Core Intel Core i5) performing 70,000 tokenization per second with random 8 character data input. Performance results are indicative only and depend on hardware, workload, and configuration
To run the performance tests:
python3 -m ff3.ff3_perfThe FF3 algorithm is a tweakable block cipher based on an eight round Feistel cipher. A block cipher operates on fixed-length groups of bits, called blocks. A Feistel Cipher is not a specific cipher, but a design model. This FF3 Feistel encryption consisting of eight rounds of processing the plaintext. Each round applies an internal function or round function, followed by transformation steps.
The FF3 round function uses AES encryption in ECB mode, which is performed each iteration on alternating halves of the text being encrypted. The key value is used only to initialize the AES cipher. Thereafter the tweak is used together with the intermediate encrypted text as input to the round function.
Only FF1 and FF3 have been approved by NIST for format preserving encryption. There are patent claims on FF1 which allegedly include open source implementations. Given the issues raised in "The Curse of Small Domains: New Attacks on Format-Preserving Encryption" by Hoang, Tessaro and Trieu in 2018, it is prudent to be very cautious about using any FPE that isn't a standard and hasn't stood up to public scrutiny.
Bug reports, feature requests, and pull requests are welcome. Please use the GitHub Issues page to report problems or ask questions: https://github.com/mysto/python-fpe/issues.
By contributing, you agree that your contributions are provided under the Apache 2.0 license. All documentation and issue discussions are conducted in English.
This implementation was originally based upon the Capital One Go implementation. It follows the algorithm as outlined in the NIST specification as closely as possible, including naming.
FPE can be used for data tokenization of sensitive data which is cryptographically reversible. This implementation does not provide any guarantees regarding PCI DSS or other validation.
While all NIST and ACVP test vectors pass, this package has not undergone independent security review or formal cryptographic validation.
The cryptographic library used is PyCryptodome for AES encryption. FF3 uses a single-block with an IV of 0, which is effectively ECB mode. AES ECB is the only block cipher function which matches the requirement of the FF3 spec. This does not imply that ECB mode is safe for general-purpose encryption; it is used here solely because it is required by the FF3 specification
The domain size was revised in FF3-1 to radixminLen >= 1,000,000 and is represented by the constant DOMAIN_MIN in ff3.py. FF3-1 is in draft status.
The tweak is required in the initial FF3Cipher constructor, but can optionally be overridden in each encrypt and decrypt call. This is similar to passing an IV or nonce when creating an encrypter object.
Use python -m build to build the project.
To install the development version:
git clone https://github.com/mysto/python-fpe.git
cd python-fpe
pip3 install --editable .Before contributing any pull requests, you will need to first fork this repository.
Brad Schoening
This project is licensed under the terms of the Apache 2.0 license.